Ceramic Machine Screw, Flat Head, Slotted Drive, #5-40, 3/8" Length (Pack of 1)

Ceramic Machine Screw, Flat Head, Slotted Drive, #5-40, 3/8" Length (Pack of 1) Reviews

Other Picture

Ceramic Machine Screw, Flat Head, Slotted Drive, #5-40, 3/8" Length (Pack of 1) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Ceramic is suitable where primary considerations are high temperature and corrosion resistance
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Ceramic is produced from low pressure injection molded ceramics, utilizing 99.8% fully dense aluminum oxide (Alumina A998). In addition to the outstanding electrical insulation properties of alumina, this material offers unusual resistance to high temperature, corrosion, and abrasion.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 30, 2011 09:57:04

PVC Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 10)

PVC Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 10) Reviews

Other Picture

PVC Machine Screw, Flat Head, Slotted Drive, #4-40, 1/2" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• PVC is suitable where insulating properties are important and/or where exposure to water is expected
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polyvinylchloride, or PVC, exhibits little or no water absorption, absorbing 0.05% of its weight after 24 hours of exposure to water. Because it is chlorinated, PVC also possesses natural flame retardant qualities. PVC has one of the highest dielectric strengths of plastics, at 1413 volts per millimeter, making it an excellent insulator. PVC possesses average to above average strength compared to other plastics, with a tensile strength of 7450 psi (pounds per square inch) and an impact strength of 5 force pounds (Izod Impact Scale). The primary drawback of PVC is its low melting point temperature of 140 degrees Fahrenheit.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 29, 2011 13:17:04

Nylon 6/6 Machine Screw, Oval Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Oval Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Oval Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Oval head style for recessed finish with a slightly rounded surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon Machine Screw, Oval Head, Slotted Drive, M3.5-0.6, 16mm Length (Pack of 50)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #3-48, 1/2" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Cheese Head, Slotted Drive, M3-0.5, 25mm Length (Pack of 100)

Detail Reviews

Apr 28, 2011 00:47:06

Stainless Steel 18-8 Machine Screw, Vented Flat Head, Phillips Drive, M3-0.5, 16mm Length (Pack of 10)

Stainless Steel 18-8 Machine Screw, Vented Flat Head, Phillips Drive, M3-0.5, 16mm Length (Pack of 10) Reviews

Other Picture

Stainless Steel 18-8 Machine Screw, Vented Flat Head, Phillips Drive, M3-0.5, 16mm Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• General Purpose Stainless Steel suitable where formability and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material.

Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Vented fasteners have been drilled through their entire length to eliminate the possibility of virtual leaks caused by the trapped volume of air at the bottom of blind tapped holes.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M2-0.4, 10mm Length (Pack of 100)
• Sanyo Eneloop 8 Pack AA NiMH Pre-Charged Rechargeable Batteries
• Microsoft Windows 7 Professional Upgrade

Detail Reviews

Apr 27, 2011 03:43:04

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100)

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 1-3/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #2-56, 5/8" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #00-90, 1/2" Length (Pack of 100)

Detail Reviews

Apr 26, 2011 03:31:03

Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10)

Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10) Reviews

Other Picture

Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Often used in aircraft fastening applications, drilled-head fasteners have a small hole drilled from one side of the head through to the other side - allowing lengths of wire to be used to prevent loosening on adjacent fasteners by wiring them together. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #3-56, 3/8" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #10-24, 1" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 1-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, 1/4"-28, 1-7/8" Length (Pack of 10)

Detail Reviews

Apr 23, 2011 18:23:06

Nylon Machine Screw, Fillister Head, Slotted Drive, #6-40, 1" Length (Pack of 25)

Nylon Machine Screw, Fillister Head, Slotted Drive, #6-40, 1" Length (Pack of 25) Reviews

Other Picture

Nylon Machine Screw, Fillister Head, Slotted Drive, #6-40, 1" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 1-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #3-48, 1/2" Length (Pack of 100)
• Nylon Machine Screw, Hex Head, #4-40, 3/4" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #2-56, 3/4" Length (Pack of 100)

Detail Reviews

Apr 22, 2011 09:28:04

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M6-1, 30mm Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M6-1, 30mm Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M6-1, 30mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, M6-1, 45mm Length (Pack of 50)

Detail Reviews

Apr 21, 2011 06:45:04

Stainless Steel Machine Screw, Pan Head, Slotted Drive, M8-1.25, 25mm Length (Pack of 25)

Stainless Steel Machine Screw, Pan Head, Slotted Drive, M8-1.25, 25mm Length (Pack of 25) Reviews

Other Picture

Stainless Steel Machine Screw, Pan Head, Slotted Drive, M8-1.25, 25mm Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Pan head allows for higher tightening torques
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #2-56, 1" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)

Detail Reviews

Apr 20, 2011 09:50:04

Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #10-24, 1-1/2" Length (Pack of 100)

Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #10-24, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #10-24, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #2-56, 1" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #6-32, 2" Length (Pack of 100)

Detail Reviews

Apr 19, 2011 13:03:04

Nylon Machine Screw, Pan Head, Phillips Drive, 1/4"-20, 7/8" Length (Pack of 100)

Nylon Machine Screw, Pan Head, Phillips Drive, 1/4"-20, 7/8" Length (Pack of 100) Reviews

Other Picture

Nylon Machine Screw, Pan Head, Phillips Drive, 1/4"-20, 7/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 1-1/2" Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #2-56, 3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #0-80, 1/8" Length (Pack of 100)
• Nylon Machine Screw, Hex Head, #4-40, 3/4" Length (Pack of 25)

Detail Reviews

Apr 18, 2011 03:45:04

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 1-1/8" Length (Pack of 100)

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 1-1/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 1-1/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #10-24, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #0-80, 1/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #2-56, 1" Length (Pack of 100)

Detail Reviews

Apr 16, 2011 21:43:04

PVDF Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 1)

PVDF Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 1) Reviews

Other Picture

PVDF Machine Screw, Flat Head, Slotted Drive, #0-80, 1/4" Length (Pack of 1) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• PVDF is suitable for applications that require high purity and low water absorption, along with greater strength than PTFE
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polyvinylidene Fluoride, or PVDF, has a useful temperature range of -148 to 300 degrees Fahrenheit. PVDF exhibits similar properties to Kynar, a trade name of the Arkema Corporation. PVDF is generally used in applications requiring high purity, strength, and resistance to solvents, acids, bases and heat. It also generates little smoke during a fire event. PVDF exhibits below average strength as compared to Nylon 6/6, with tensile strength ranging from 5000 to 7000 psi (pounds per square inch) and impact strength of 1.2 foot pounds (on the Izod Impact Scale) as compared to 9000 psi, and 3 foot pounds, respectively. PVDF is stronger than PTFE and could be desirable where PTFE is not strong enough for the application. PVDF will absorb little or no water after 24 hours of exposure (less than 0.05% of weight impact). PVDF also has below average dielectric strength of 260 volts per millimeter (compared to 500 volts/mm for Nylon).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 15, 2011 12:11:04