Showing posts with label 1428. Show all posts
Showing posts with label 1428. Show all posts

Stainless Steel 18-8 Machine Screw, Flat Head, 100 Degree, Phillips Drive, MIL-SPEC, 1/4"-28, 1/2" Length (Pack of 100)

Stainless Steel 18-8 Machine Screw, Flat Head, 100 Degree, Phillips Drive, MIL-SPEC, 1/4"-28, 1/2" Length (Pack of 100) Reviews



Other Picture


Stainless Steel 18-8 Machine Screw, Flat Head, 100 Degree, Phillips Drive, MIL-SPEC, 1/4"-28, 1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • General Purpose Stainless Steel suitable where formability and cost are important considerations
  • Flat head style allows fastener to sit flush to the surface
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316). Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to % of Nickel contained in the material.

Stainless Steel 18-8 denotes 18% chromium and 8% nickel. Stainless Steel 18-8 can be formed and welded. Stainless Steel 18-8 is typically non-magnetic, though the material can become slightly magnetic when cold worked (cold working refers to altering the physical properties of the material without the use of temperature).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




May 26, 2011 18:43:19
0 comments
Labels: , , , , , , , ,

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 3/16" Length (Pack of 100)

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 3/16" Length (Pack of 100) Reviews



Other Picture


Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 3/16" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations; black color
  • Fillister head for high torque and good hold-down strength
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 12, 2011 04:44:05
0 comments
Labels: , , , , , ,

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 1" Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 1" Length (Pack of 100) Reviews



Other Picture


Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 1" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
  • Fillister head for high torque and good hold-down strength
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Apr 09, 2011 07:17:05
0 comments
Labels: , , , , , ,

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 1/4" Length (Pack of 100)

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 1/4" Length (Pack of 100) Reviews



Other Picture


Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 1/4" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations; black color
  • Fillister head for high torque and good hold-down strength
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 24, 2011 16:37:08
0 comments
Labels: , , , , , ,

Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, 1/4"-28, 1-7/8" Length (Pack of 25)

Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, 1/4"-28, 1-7/8" Length (Pack of 25) Reviews



Other Picture


Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, 1/4"-28, 1-7/8" Length (Pack of 25) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Stainless Steel is suitable where formability and cost are important considerations
  • Flat head style allows fastener to sit flush to the surface
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 14, 2011 07:44:04
0 comments
Labels: , , , , , , , ,

Nylon Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 3/16" Length (Pack of 100)

Nylon Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 3/16" Length (Pack of 100) Reviews



Other Picture


Nylon Machine Screw, Fillister Head, Phillips Drive, 1/4"-28, 3/16" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
  • Fillister head for high torque and good hold-down strength
  • Phillips drive is designed to cam out under too much torque
  • Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 11, 2011 06:47:04
0 comments
Labels: , , , , , ,