Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #6-32, 1/2" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100)

Detail Reviews

Oct 01, 2011 03:35:04

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #5-40, 5/8" Length (Pack of 100)

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #5-40, 5/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #5-40, 5/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 9/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Sep 24, 2011 15:05:05

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.400" Length (Pack of 100)

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.400" Length (Pack of 100) Reviews

Other Picture

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.400" Length (Pack of 100) Feature

• Machined, Precision, Instrument quality machine screws, manufactured to National Aerospace Standards
• Precision, Burr free
• Passivated 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch). Passivation helps prevent corrosion in certain stainless steels by removing surface impurities that can be caused by machining or forming processes. These impurities block the normally occurring formation of a protective oxide coating on the steel.

Fillister head for high torque and good hold-down strength

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 06, 2011 03:19:05

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-20, 1-1/2" Length (Pack of 100)

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Reviews

Other Picture

Black Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, 1/4"-20, 1-1/2" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations; black color
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Black Nylon 6/6 Socket Cap Screw, Hex Socket Drive, #4-40, 5/8" Length (Pack of 100)
• Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #6-32, 1/4" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

Detail Reviews

Sep 05, 2011 05:11:05

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #10-24, 3/8" Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #10-24, 3/8" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, #10-24, 3/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 3/32" Length (Pack of 100)
• Nylon Machine Screw, Pan Head, Phillips Drive, #10-24, 1-1/4" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 7/8" Length (Pack of 100)
• Nylon 6/6 Hex Nut, #4-40 (Pack of 100)
• Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #4-40, 3/16" Length (Pack of 100)

Detail Reviews

Jul 31, 2011 00:32:04

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.1875" Length (Pack of 100)

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.1875" Length (Pack of 100) Reviews

Other Picture

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.1875" Length (Pack of 100) Feature

• Screws conform to ANSI B18.6.3
• Precision, Burr free
• 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nut Stainless Steel 000-120 x 5/64 across the flats x .040" Thick (Pack of 25)
• Translucent Amber Miniature Polyimide Tubing, 23 AWG, 0.0226" ID, 0.0286" OD, 0.0030" Wall, 30" Length
• Stainless Steel 304 Hypodermic Round Tubing, 11 Gauge, 0.1200" OD, 0.087" ID, 0.0165" Wall, 60" Length
• Precision Stainless Steel 303 Machine Screw, Binding Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.0625" Length (Pack of 100)
• TRENDnet USB to Serial Converter TU-S9 (Blue)

Detail Reviews

Jul 17, 2011 09:54:39

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1.2-0.25, 0.060" Length (Pack of 1000)

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1.2-0.25, 0.060" Length (Pack of 1000) Reviews

Other Picture

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1.2-0.25, 0.060" Length (Pack of 1000) Feature

• Machined, Precision, Instrument quality machine screws, manufactured to National Aerospace Standards
• Precision, Burr free
• Passivated 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch). Passivation helps prevent corrosion in certain stainless steels by removing surface impurities that can be caused by machining or forming processes. These impurities block the normally occurring formation of a protective oxide coating on the steel.

Fillister head for high torque and good hold-down strength

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Jul 05, 2011 11:13:05

Nylon Machine Screw, Fillister Head, Phillips Drive, #6-32, 7/8" Length (Pack of 50)

Nylon Machine Screw, Fillister Head, Phillips Drive, #6-32, 7/8" Length (Pack of 50) Reviews

Other Picture

Nylon Machine Screw, Fillister Head, Phillips Drive, #6-32, 7/8" Length (Pack of 50) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon Machine Screw, Pan Head, Phillips Drive, #8-32, 3/4" Length (Pack of 10)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #5-40, 1/2" Length (Pack of 100)
• Nylon Machine Screw, Pan Head, Slotted Drive, #10-24, 5/8" Length (Pack of 50)
• Nylon Machine Screw, Fillister Head, Slotted Drive, #3-48, 3/8" Length (Pack of 50)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)

Detail Reviews

Jun 13, 2011 23:55:05

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Cheese Head, Slotted Drive, M2.5-0.45, 5mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M4-0.7, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #8-32, 1-1/2" Length (Pack of 100)

Detail Reviews

May 31, 2011 01:51:04

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.060" Length (Pack of 100)

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.060" Length (Pack of 100) Reviews

Other Picture

Precision Stainless Steel 303 Machine Screw, Flat Fillister Head, Slotted Drive, NAS, M1-0.25, 0.060" Length (Pack of 100) Feature

• Machined, Precision, Instrument quality machine screws, manufactured to National Aerospace Standards
• Precision, Burr free
• Passivated 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch). Passivation helps prevent corrosion in certain stainless steels by removing surface impurities that can be caused by machining or forming processes. These impurities block the normally occurring formation of a protective oxide coating on the steel.

Fillister head for high torque and good hold-down strength

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

May 29, 2011 00:25:36

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.25" Length (Pack of 25)

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.25" Length (Pack of 25) Reviews

Other Picture

Precision Stainless Steel 303 Machine Screw, Fillister Head, Slotted Drive, ANSI B18.6.3, #00-90, 0.25" Length (Pack of 25) Feature

• Screws conform to ANSI B18.6.3
• Precision, Burr free
• 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Precision Stainless Steel 303 Machine Screw, Binding Head, Slotted Drive, ANSI B18.6.3, #000-120, 0.0625" Length (Pack of 100)
• Stainless Steel 304 Hypodermic Round Tubing, 25 Gauge, 0.0203" OD, 0.01" ID, 0.005" Wall, 60" Length (Pack of 5)
• TRENDnet USB to Serial Converter TU-S9 (Blue)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #12-24, 1/2" Length (Pack of 100)
• Translucent Amber Miniature Polyimide Tubing, 26 AWG, 0.0159" ID, 0.0219" OD, 0.0030" Wall, 12" Length (Pack of 10)

Detail Reviews

May 02, 2011 11:52:04

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100)

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #6-32, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 1-3/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #2-56, 5/8" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, #00-90, 1/2" Length (Pack of 100)

Detail Reviews

Apr 26, 2011 03:31:03

Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10)

Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10) Reviews

Other Picture

Stainless Steel Machine Screw, Drilled Fillister Head, Slotted Drive, MIL-SPEC, #6-40, 1/4" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Often used in aircraft fastening applications, drilled-head fasteners have a small hole drilled from one side of the head through to the other side - allowing lengths of wire to be used to prevent loosening on adjacent fasteners by wiring them together. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #3-56, 3/8" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, #10-24, 1" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #6-32, 1-1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #8-32, 1/2" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, MIL-SPEC, 1/4"-28, 1-7/8" Length (Pack of 10)

Detail Reviews

Apr 23, 2011 18:23:06