Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon 6/6 Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)
• Steel Hex Nut, DIN, M2-0.4 (Pack of 100)
• Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100)

Detail Reviews

Oct 04, 2011 00:45:10

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 6mm Length (Pack of 100)

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 6mm Length (Pack of 100) Reviews

Other Picture

Zinc Plated Steel Machine Screw, Pan Head, Phillips Drive, M5-0.8, 6mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Zinc Plated Steel fasteners are suitable where strength and corrosion resistance are primary considerations
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon Flat Washer, DIN, M5, 5.30mm ID, 11.00mm OD, 1mm Thick (Pack of 100)
• Steel Hex Nut, DIN, M3-0.5 (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, M4-0.7, 10mm Length (Pack of 100)
• 5mm Metric Flat Washer (100 count)
• Alloy Steel Socket Cap Screw, Hex Socket Drive, M10-1.5, 100mm Length (Pack of 10)

Detail Reviews

Jul 19, 2011 10:26:05

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Fillister Head, Phillips Drive, M5-0.8, 15mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Cheese Head, Slotted Drive, M2.5-0.45, 5mm Length (Pack of 100)
• Nylon 6/6 Hex Nut, M3-0.5 (Pack of 100)
• Nylon 6/6 Machine Screw, Oval Head, Slotted Drive, M4-0.7, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #8-32, 1-1/2" Length (Pack of 100)

Detail Reviews

May 31, 2011 01:51:04

Nylon 6/6 Machine Screw, Oval Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100)

Nylon 6/6 Machine Screw, Oval Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Oval Head, Phillips Drive, M5-0.8, 10mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Oval head style for recessed finish with a slightly rounded surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Similar to a flat-head style, the oval head style has a slightly convex top surface; it is typically used for appearance. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, M5-0.8, 25mm Length (Pack of 100)
• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon Machine Screw, Oval Head, Slotted Drive, M3.5-0.6, 16mm Length (Pack of 50)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #3-48, 1/2" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Cheese Head, Slotted Drive, M3-0.5, 25mm Length (Pack of 100)

Detail Reviews

Apr 28, 2011 00:47:06

Stainless Steel Machine Screw, Cheese Head, Slotted Drive, M5-0.8, 40mm Length (Pack of 100)

Stainless Steel Machine Screw, Cheese Head, Slotted Drive, M5-0.8, 40mm Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Cheese Head, Slotted Drive, M5-0.8, 40mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Cheese head permits greater grip and driving power
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Featuring a thick cylindrical head, cheese head style fasteners allow deeper grooves for driving, allowing greater driving force. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #1-72, 3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 2-1/4" Length (Pack of 10)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #8-32, 1-3/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #4-40, 7/8" Length (Pack of 25)

Detail Reviews

Apr 04, 2011 13:52:06

Nylon Machine Screw, Flat Head, Phillips Drive, M5-0.8, 40mm Length (Pack of 100)

Nylon Machine Screw, Flat Head, Phillips Drive, M5-0.8, 40mm Length (Pack of 100) Reviews

Other Picture

Nylon Machine Screw, Flat Head, Phillips Drive, M5-0.8, 40mm Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon Machine Screw, Hex Head, #4-40, 1-1/4" Length (Pack of 100)
• Nylon Machine Screw, Pan Head, Phillips Drive, M2-0.4, 4mm Length (Pack of 100)
• Nylon Machine Screw, Binding Head, Slotted Drive, #8-32, 1/2" Length (Pack of 100)
• Black Nylon Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #8-32, 5/16" Length (Pack of 100)
• Nylon Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 2-1/2" Length (Pack of 100)

Detail Reviews

Mar 05, 2011 11:56:04