Showing posts with label 256. Show all posts
Showing posts with label 256. Show all posts

Brass Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100)

Brass Machine Screw, Round Head, Slotted Drive, #2-56, 3/8" Length (Pack of 100) Reviews



Other Picture


Miniature Brass Screws Brass is nonmagnetic with very good corrosion resistance. Usually softer than carbon steel and stainless steel. Rockwell hardness is B60.


Visit Store Now !!

Detail Products

Detail Reviews




Aug 11, 2011 18:14:04
0 comments
Labels: , , , , ,

Ceramic Machine Screw, Hex Head, #2-56, 3/8" Length (Pack of 1)

Ceramic Machine Screw, Hex Head, #2-56, 3/8" Length (Pack of 1) Reviews



Other Picture


Ceramic Machine Screw, Hex Head, #2-56, 3/8" Length (Pack of 1) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Ceramic is suitable where primary considerations are high temperature and corrosion resistance
  • Hex head for easy driving
  • Length is measured from under the head
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Ceramic is produced from low pressure injection molded ceramics, utilizing 99.8% fully dense aluminum oxide (Alumina A998). In addition to the outstanding electrical insulation properties of alumina, this material offers unusual resistance to high temperature, corrosion, and abrasion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jul 30, 2011 03:38:05
0 comments
Labels: , , , ,

Brass Machine Screw, Pan Head, Phillips Drive, #2-56, 1/2" Length (Pack of 100)

Brass Machine Screw, Pan Head, Phillips Drive, #2-56, 1/2" Length (Pack of 100) Reviews



Other Picture


Brass Machine Screw, Pan Head, Phillips Drive, #2-56, 1/2" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Brass is suitable where corrosion resistance is a primary consideration
  • Pan head allows for higher tightening torques
  • Phillips drive is designed to cam out under too much torque
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jul 16, 2011 14:43:14
0 comments
Labels: , , , , ,

Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #2-56, 3/8" Length (Pack of 100)

Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #2-56, 3/8" Length (Pack of 100) Reviews



Other Picture


Black Nylon 6/6 Machine Screw, Binding Head, Combination Phillips-Slotted Drive, #2-56, 3/8" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations; black color
  • Binding head provides a large surface area for extra surface contact under the head
  • Accommodates both Phillips and Slotted drivers
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Combination Phillips-Slotted drive styles allow for greater flexibility in choosing a drive tool (either Phillips or standard slotted).

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Jun 02, 2011 07:56:04
0 comments
Labels: , , , , ,

Polypropylene Machine Screw, Flat Head, Slotted Drive, #2-56, 1/2" Length (Pack of 25)

Polypropylene Machine Screw, Flat Head, Slotted Drive, #2-56, 1/2" Length (Pack of 25) Reviews



Other Picture


Polypropylene Machine Screw, Flat Head, Slotted Drive, #2-56, 1/2" Length (Pack of 25) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
  • Flat head style allows fastener to sit flush to the surface
  • Driven by a flat-bladed driver
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Visit Store Now !!

Detail Products

Detail Reviews




Mar 03, 2011 10:33:05
0 comments
Labels: , , , , ,

Nylon Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100)

Nylon Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100) Reviews



More Picture


Nylon Machine Screw, Binding Head, Slotted Drive, #2-56, 1/4" Length (Pack of 100) Feature

  • Machine Screws are often used with nuts or driven into tapped holes
  • Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
  • Binding head provides a large surface area for extra surface contact under the head
  • Driven by a flat-bladed driver
  • Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads
Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.


Go tO Store Now !!

More Products

More Reviews




Feb 22, 2011 02:57:04
0 comments
Labels: , , , , , ,