Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100)

Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100) Reviews

Other Picture

Nylon 6/6 Machine Screw, Fillister Head, Slotted Drive, #10-32, 7/16" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Nylon 6/6 is suitable where non-conductivity, corrosion resistance, and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Nylon 6/6 is a general purpose thermoplastic with outstanding resistance to organic chemicals, acids and alkalis. Nylon wears well against other surfaces; it is readily machinable and may be milled, turned and cut with conventional machine tools. It does exhibit some dimensional swelling in wet applications which should be taken into account with its use. Tensile strength of this material is 12,000 psi (pounds per square inch).

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #4-40, 1" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Hex Head, 1/4"-20, 2" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #6-32, 1/2" Length (Pack of 25)
• Nylon 6/6 Machine Screw, Pan Head, Slotted Drive, #4-40, 3/8" Length (Pack of 100)
• Nylon 6/6 Machine Screw, Round Head, Slotted Drive, #4-40, 1/2" Length (Pack of 100)

Detail Reviews

Oct 01, 2011 03:35:04

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/2" Length (Pack of 25)

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/2" Length (Pack of 25) Reviews

Other Picture

Stainless Steel Machine Screw, Hex Socket Drive, MIL-SPEC, #10-32, 1-1/2" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Socket cap head fasteners are very common in industrial applications
• Drive system is a hexagon-shaped hole
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

With a high cylindrical head, socket cap head fasteners have a recessed driving area and offer high hold power at high torque levels. Hex socket drive systems are driven by hex wrenches or power tools with hexagonal bits.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #4-40, 1-1/8" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #1-72, 5/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, #10-24, 2-1/2" Length (Pack of 25)
• Black Oxide Heat Treated Alloy Steel Socket Head Cap Screw, Hex Socket Drive, 3/8"-24, 3/4" Length (Pack of 100)
• Stainless Steel Socket Cap Screw, Hex Socket Drive, #8-32, 7/8" Length (Pack of 5)

Detail Reviews

Sep 29, 2011 19:30:08

Polypropylene Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 100)

Polypropylene Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 100) Reviews

Other Picture

Polypropylene Machine Screw, Pan Head, Phillips Drive, #6-32, 1-1/4" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Acetal Machine Screw, Pan Head, Phillips Drive, #10-24, 1" Length (Pack of 100)
• Polypropylene Machine Screw, Binding Head, Slotted Drive, #10-24, 1/2" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.055" ID, 0.087" OD, 0.035" Thick, 0.300" Shoulder Diameter, 0.087" Length (Pack of 100)
• 30% Glass Filled Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/4" Length (Pack of 50)
• Polycarbonate Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/2" Length (Pack of 25)

Detail Reviews

Sep 27, 2011 08:46:06

Precision Stainless Steel 303 Machine Screw, Binding Head, Slotted Drive, NAS, M.5-0.125, 0.120" Length (Pack of 10)

Precision Stainless Steel 303 Machine Screw, Binding Head, Slotted Drive, NAS, M.5-0.125, 0.120" Length (Pack of 10) Reviews

Other Picture

Precision Stainless Steel 303 Machine Screw, Binding Head, Slotted Drive, NAS, M.5-0.125, 0.120" Length (Pack of 10) Feature

• Machined, Precision, Instrument quality machine screws, manufactured to National Aerospace Standards
• Precision, Burr free
• Passivated 303 Stainless Steel Material conforms to AMS-5640 Type 1, ASTM-A-582, MIL-S-7720, QQS763C, QQS764B
• Aerospace Quality
• Medical Quality

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 303 contains 0.15% carbon, along with traces of sulfur and phosphorus which makes this a free machining alloy. Free machining refers to the ability to cut and finish the materials without heavy wear on the machining tools. Tensile Strength is 35000 psi (pounds per square inch). Passivation helps prevent corrosion in certain stainless steels by removing surface impurities that can be caused by machining or forming processes. These impurities block the normally occurring formation of a protective oxide coating on the steel.

Binding head provides a large surface area for extra surface contact under the head

A threaded fastener's size name includes information about the major external diameter (in millimeters), followed by the thread pitch (millimeters per thread), which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

Detail Reviews

Sep 25, 2011 16:25:27

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #5-40, 5/8" Length (Pack of 100)

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #5-40, 5/8" Length (Pack of 100) Reviews

Other Picture

Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #5-40, 5/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel is suitable where formability and cost are important considerations
• Fillister head for high torque and good hold-down strength
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness.  These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements.  The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels.   Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).  Another common naming convention for Austenitic Stainless Steels are 18/8, 18/10, 18/0, etc. where the 18 refers to the % of Chromium and 8 to the % of Nickel contained in the material.    

Fillister head fasteners are considered an improvement over round head equivalents - the smaller head creates more downward pressure for a given torque level and the thicker head plus deeper drive slot allows higher torque levels to be generated. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 9/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, MIL-SPEC, 1/4"-20, 2" Length (Pack of 100)

Detail Reviews

Sep 24, 2011 15:05:05

Polypropylene Machine Screw, Binding Head, Slotted Drive, #10-32, 5/8" Length (Pack of 25)

Polypropylene Machine Screw, Binding Head, Slotted Drive, #10-32, 5/8" Length (Pack of 25) Reviews

Other Picture

Polypropylene Machine Screw, Binding Head, Slotted Drive, #10-32, 5/8" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
• Binding head provides a large surface area for extra surface contact under the head
• Driven by a flat-bladed driver
• Fine threads tap better into harder materials and thin walls, and are stronger in tension than coarse threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Generally used in electrical or radio work, these fasteners are slightly undercut under the head. That provides the ability to bind stranded wire tightly and prevent fraying. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Fine threads are preferable when working with harder materials or when threading into a thin material. They are also stronger in tension than coarse threads, and generally provide higher shear strengths.

Visit Store Now !!

Detail Products

• Nylon 6/6 Machine Screw, Binding Head, Slotted Drive, #10-32, 2" Length (Pack of 100)
• Polypropylene Machine Screw, Pan Head, Phillips Drive, #4-40, 1-1/2" Length (Pack of 25)
• Polycarbonate Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/2" Length (Pack of 25)
• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Polycarbonate Machine Screw, Binding Head, Slotted Drive, 1/4"-20, 3/8" Length (Pack of 100)

Detail Reviews

Sep 22, 2011 23:51:05

Acetal Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 7/8" Length (Pack of 10)

Acetal Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 7/8" Length (Pack of 10) Reviews

Other Picture

Acetal Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 7/8" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Acetal is suitable where hardness and water resistance are important considerations
• Pan head allows for higher tightening torques
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Acetal resins are characterized by their strength, stiffness, and hardness, and are stable over a wide range of temperatures, humidity, environments, and stress. Acetal has a low coefficient of friction, and absorbs little water, minimizing the effect of moisture on its physical properties. Acetal resists neutral oils, grease, petroleum-based fuels, many organic solvents, alkalis, oxidizing agents and acids, both organic and inorganic. Compared to Nylon 6/6, Acetal is harder and has better water resistance, but lower impact strength and abrasion resistance. Acetal is translucent off white in color.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, 3/8"-16, 1" Length (Pack of 25)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)

Detail Reviews

Sep 21, 2011 22:44:09

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 2" Length (Pack of 25)

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 2" Length (Pack of 25) Reviews

Other Picture

Stainless Steel 316 Machine Screw, Flat Head, Phillips Drive, 1/4"-20, 2" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Stainless Steel 316 is suitable for use where Stainless Steel 304 does not provide enough corrosion resistance
• Flat head style allows fastener to sit flush to the surface
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Stainless steels are used for their corrosion resistance, high-temperature strength, scaling resistance, and low-temperature toughness. These properties account for their extremely wide use in practically every industry. Austenitic Stainless Steels are alloys of iron and carbon that contain between 16% and 30% Chromium, a maximum of 0.15% carbon, along with Nickel (or Manganese), and other alloying elements. The chromium, which helps develop a passive surface oxide film, provides corrosion resistance in stainless steels. Austenitic Stainless Steels are designated by a 3 digit SAE Stainless Steel Grade beginning with the number 3 (e.g. 304, 316).

Stainless Steel 316 has a higher nickel and molybdenum content than most Austenitic stainless steels which means that this material offers more corrosion resistance without giving up strength or hardness. Tensile strength is 35,000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel 18-8 Machine Screw, 100 Degree Flat Head, Phillips Drive, MIL-SPEC, #6-32, 3/8" Length (Pack of 100)
• Stainless Steel 316 Machine Screw, Pan Head, Phillips Drive, #8-32, 3/4" Length (Pack of 25)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #1-64, 1/4" Length (Pack of 100)
• Zinc Plated Steel Machine Screw, Flat Head, Phillips Drive, #6-32, 1/4" Length (Pack of 100)

Detail Reviews

Sep 20, 2011 14:06:05

Brass Machine Screw, Pan Head, Phillips Drive, #3-48, 5/8" Length (Pack of 100)

Brass Machine Screw, Pan Head, Phillips Drive, #3-48, 5/8" Length (Pack of 100) Reviews

Other Picture

Brass Machine Screw, Pan Head, Phillips Drive, #3-48, 5/8" Length (Pack of 100) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Brass is suitable where corrosion resistance is a primary consideration
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Brass Machine Screw, Round Head, Slotted Drive, #2-56, 1" Length (Pack of 100)
• Brass Hex Nut, #4-40 (Pack of 100)
• Stainless Steel Machine Screw, Pan Head, Phillips Drive, #10-32, 9/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)

Detail Reviews

Sep 19, 2011 17:53:13

4-40 X 1/4 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / 5,000 Pc. Carton

4-40 X 1/4 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / 5,000 Pc. Carton Reviews

Other Picture

4-40 X 1/4 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel / 5,000 Pc. Carton Feature

• 4-40 X 1/4 Machine Screws
• Flat Head
• Stainless Steel
• RoHS Compliant

4-40 X 1/4 Machine Screws / Phillips / Flat Head / 18-8 Stainless Steel

Visit Store Now !!

Detail Products

Detail Reviews

Sep 18, 2011 20:57:09

Ceramic Machine Screw, Hex Head, #5-40, 3/4" Length (Pack of 1)

Ceramic Machine Screw, Hex Head, #5-40, 3/4" Length (Pack of 1) Reviews

Other Picture

Ceramic Machine Screw, Hex Head, #5-40, 3/4" Length (Pack of 1) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Ceramic is suitable where primary considerations are high temperature and corrosion resistance
• Hex head for easy driving
• Length is measured from under the head
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Ceramic is produced from low pressure injection molded ceramics, utilizing 99.8% fully dense aluminum oxide (Alumina A998). In addition to the outstanding electrical insulation properties of alumina, this material offers unusual resistance to high temperature, corrosion, and abrasion.

Hex head fasteners can be driven with simple wrenches, and require minimal clearance above the fastener because they can be driven or loosened from the side.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Ceramic Socket Cap Screw, Hex Socket Drive, 1/4"-20, 3/4" Length (Pack of 1)
• Ceramic Hex Nut, #10-32 (Pack of 1)

Detail Reviews

Sep 18, 2011 01:35:04

Polypropylene Machine Screw, Pan Head, Phillips Drive, #4-40, 1/4" Length (Pack of 25)

Polypropylene Machine Screw, Pan Head, Phillips Drive, #4-40, 1/4" Length (Pack of 25) Reviews

Other Picture

Polypropylene Machine Screw, Pan Head, Phillips Drive, #4-40, 1/4" Length (Pack of 25) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Polypropylene is suitable for applications where resistance to chemicals and water (including steam) is important
• Pan head allows for higher tightening torques
• Phillips drive is designed to cam out under too much torque
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Polypropylene is a thermoplastic which is autoclavable (meaning that it can be sterilized using steam), and is non-hydroscopic (it won't absorb water even after extended periods of contact). Polypropylene has excellent chemical resistance to dilute acids, concentrated acids (except oxidizing acids), alkalis, alcohols, detergents, and water. Polypropylene resists aromatic hydrocarbons, chlorinated hydrocarbons, greases, and oils at room temperature. Maximum operating temperature is 212 degrees Fahrenheit. Polypropylene has a low co-efficient of friction and a high dielectric strength (meaning it operates well as an insulator). Polypropylene has approximately half the tensile strength and impact strength of Nylon 6/6. The tensile strength of Polypropylene is 5000 psi (pounds per square inch). Impact Strength, as measured by the Izod impact test method (which measures force required to break material) is 0.5 pounds per foot.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Acetal Machine Screw, Pan Head, Phillips Drive, #10-24, 1" Length (Pack of 100)
• Polypropylene Machine Screw, Binding Head, Slotted Drive, #10-24, 1/2" Length (Pack of 100)
• Nylon 6/6 Shoulder Washer, 0.118" ID, 0.150" OD, 0.046" Thick, 0.250" Shoulder Diameter, 0.326" Length (Pack of 100)
• 30% Glass Filled Nylon 6/6 Machine Screw, Pan Head, Phillips Drive, #8-32, 3/4" Length (Pack of 100)
• Polycarbonate Machine Screw, Pan Head, Phillips Drive, #8-32, 1-1/2" Length (Pack of 25)

Detail Reviews

Sep 16, 2011 08:19:05

PTFE Machine Screw, Flat Head, Slotted Drive, #4-40, 3/4" Length (Pack of 5)

PTFE Machine Screw, Flat Head, Slotted Drive, #4-40, 3/4" Length (Pack of 5) Reviews

Other Picture

PTFE Machine Screw, Flat Head, Slotted Drive, #4-40, 3/4" Length (Pack of 5) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• PTFE is suitable for high temperature environments and for applications that have the potential for surface wear and exposure to water and chemicals
• Flat head style allows fastener to sit flush to the surface
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

PTFE (polytetrafluoroethylene) has similar properties to Teflon, including an extremely low coefficient of friction (it doesn't stick to other materials and it resists surface wear). PTFE also exhibits a useful service life from below -100 degrees Fahrenheit, to temperatures of over 500 degrees Fahrenheit. Its resistance to solvents is also excellent throughout a wide range of temperatures. PTFE has a high dielectric strength (600 volts/millimeter) which makes it a good insulator. PTFE is also very non-hydroscopic, or water resistant, absorbing less than 0.01% of its weight if exposed to water for a 24 hour period. PTFE has below average tensile strength, at 3000 psi (pounds per square inch).

Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• PTFE Hex Nut, #10-32 (Pack of 10)
• PTFE Machine Screw, Pan Head, Slotted Drive, #10-24, 1" Length (Pack of 5)
• Stainless Steel Machine Screw, Flat Head, Phillips Drive, #2-56, 1-1/4" Length (Pack of 100)
• PTFE Sheet, White, 0.015" Thick, 12" Width, 12" Length
• Translucent Amber Miniature Polyimide Tubing, 28 AWG, 0.0126" ID, 0.0146" OD, 0010" Wall, 30" Length

Detail Reviews

Sep 15, 2011 09:14:05