Acetal Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 7/8" Length (Pack of 10)

Acetal Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 7/8" Length (Pack of 10) Reviews

Other Picture

Acetal Machine Screw, Pan Head, Slotted Drive, 1/4"-20, 7/8" Length (Pack of 10) Feature

• Machine Screws are often used with nuts or driven into tapped holes
• Acetal is suitable where hardness and water resistance are important considerations
• Pan head allows for higher tightening torques
• Driven by a flat-bladed driver
• Coarse threads are better for brittle materials, and will assemble and disassemble more quickly than fine threads

Machine Screws, also referred to as Machine Bolts, are often used with nuts or driven into tapped holes. They come in a variety of head types and drive styles, but are generally available in smaller sizes.

Acetal resins are characterized by their strength, stiffness, and hardness, and are stable over a wide range of temperatures, humidity, environments, and stress. Acetal has a low coefficient of friction, and absorbs little water, minimizing the effect of moisture on its physical properties. Acetal resists neutral oils, grease, petroleum-based fuels, many organic solvents, alkalis, oxidizing agents and acids, both organic and inorganic. Compared to Nylon 6/6, Acetal is harder and has better water resistance, but lower impact strength and abrasion resistance. Acetal is translucent off white in color.

Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. Common applications for slotted screws include woodworking, although the drive style is not designed to be used with power drivers.

A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings.

Visit Store Now !!

Detail Products

• Nylon 6/6 Shoulder Washer, 0.140" ID, 0.187" OD, 0.035" Thick, 0.312" Shoulder Diameter, 0.062" Length (Pack of 100)
• Stainless Steel Machine Screw, Flat Head, Slotted Drive, #6-32, 3/16" Length (Pack of 100)
• Stainless Steel Machine Screw, Binding Head, Slotted Drive, #5-40, 1/4" Length (Pack of 100)
• Brass Machine Screw, Round Head, Slotted Drive, 3/8"-16, 1" Length (Pack of 25)
• Stainless Steel Machine Screw, Fillister Head, Slotted Drive, #10-32, 1-1/2" Length (Pack of 100)

Detail Reviews

Sep 21, 2011 22:44:09